304 stainless steel sliding-drawer ULT freezer rack holding coloured freezer boxes, with two drawers extended

Choosing a Sliding-Drawer ULT Freezer Rack

← Back to Buying Guides

Meling Biomedical · Buying Guide

A rack has to fit through the inner opening, extend far enough for retrieval and match the box you actually store.

The accessory listing offers 15-, 18- and 25-box SUS304 racks. Match the listed rack dimensions to the usable freezer compartment and verify drawer extension before selecting by capacity.

Measure the route into the compartment

Measure the clear opening at the inner door as well as the available shelf depth, width and height. Check rails, shelves, insulation and door hardware where they could reduce the opening. Compare the rack in its installed orientation and confirm the order of the manufacturer’s dimensions before committing to the fit.

Published sliding-drawer rack options
Rack model Box positions Layout Published dimensions
ZKL304-532B-CT 15 5 layers × 3 columns 284 × 140 × 413 mm
ZKL304-632B-CT 18 6 layers × 3 columns 340 × 140 × 413 mm
ZKL304-552B-CT 25 5 layers × 5 columns 284 × 140 × 682 mm

Dimensions are shown in the order used by the current accessory listing. Confirm installed orientation and compatibility.

Check access with the drawer extended

The accessory has independently accessible sliding drawers. Check how far the drawer must extend to remove the furthest box and whether the freezer door, nearby furniture or a narrow aisle interferes. Test the actual box footprint and lid height, since the shape of the box matters to retrieval as well as storage.

Use the exact rack part number

The DW-HL50 sheet lists ZKL304-632B-CT. The DW-HL530 and DW-HL780 sheets list ZKL304-552B-CT. The standard DW-HL110V configuration lists ZKL304-432B-CT, a different part number from the three shown here. Confirm the rack listed for your cabinet and shelf arrangement in the quote.

Build the quote in rack and box quantities

Calculate the required boxes from your inventory first, then assign a realistic number to each rack. Boxes are ordered separately. Share the cabinet model, compartment dimensions, shelf position, rack orientation and box type so the supplier can confirm the proposed configuration.

Common purchasing questions

Which rack is listed for the standard DW-HL110V?

ZKL304-432B-CT. Confirm the part and shelf configuration before substituting a rack.

Compare models and request a quote

Send a drawing or measurements of the compartment and your box format for rack compatibility confirmation.

Request a quote

Specifications and sources

← Back to Buying Guides
Back to blog