How to Choose Centrifuge Tubes
Share
Compare three sterile polypropylene tube formats and check the rotor configuration before ordering.
Where to start
Start with the sample volume, relative centrifugal force and temperature required by your method. Then check that the tube dimensions, shape and closure match your rotor or adapter.
1.5 mL
15 mL
50 mL
Choose the tube format and closure
The 1.5 mL microcentrifuge tube has a hinged lid with a locking feature and a frosted writing area. Check that the rotor has clearance for the closed lid and hinge.
The 15 and 50 mL conical tubes have screw caps. Their listed dimensions are 17 × 120 mm and 30 × 115 mm respectively. Match the diameter and conical bottom to the selected rotor cavity or adapter, and check cap clearance when the rotor or bucket is closed.
Verify rotor support and the required force
Use the method’s relative centrifugal force (RCF), expressed in ×g, when checking the tube rating. The force at a given rotational speed depends on the rotor radius. Check the tube manufacturer’s rated conditions together with the rotor manufacturer’s tube and adapter specifications.
For a run with a specific force or temperature requirement, have the centrifuge model, rotor, adapter and intended fill volume ready before ordering. See our laboratory centrifuge buying guide for help matching the equipment to the tube format.
Compare CITOTEST pack and carton sizes
Use the manufacturer reference (REF) to choose the exact product. The linked product pages show pricing and availability for each order format.
| Product | CITOTEST REF | Per pack | Per carton |
|---|---|---|---|
| 1.5 mL microcentrifuge tubeHinged locking lid, packed in bags | 4610-1910 | 500 tubes | 5,000 tubes |
| 15 mL conical tube17 × 120 mm, screw cap, racked | 4610-1921 | 25 tubes | 500 tubes |
| 50 mL conical tube30 × 115 mm, screw cap, racked | 4610-1940 | 25 tubes | 300 tubes |
Prepare your quote request
Include the CITOTEST REF, quantity in packs or cartons and delivery postal code. If you need to confirm suitability for a run, include the centrifuge and rotor models, adapter, target RCF and temperature.