White VivTek LTC-H1650 centrifuge with lid closed and front controls visible

Laboratory Centrifuge Buying Guide

← Back to Buying Guides

Compare VivTek centrifuges by rotor and tube format, required relative centrifugal force, samples per run and refrigeration.

Where to start

Start with the tube or bottle, sample count and relative centrifugal force required by your method. Confirm that the specific rotor reaches that force with your containers. If the method calls for temperature control, compare the refrigerated listings separately.

White VivTek LTC-H1650 centrifuge with lid closed and front controls visible
VivTek LTC-H1650 benchtop centrifuge.

Lower-speed and higher-volume configurations

  • LTC-L400 centrifuge

    The LTC-L400 lists 12 × 20 mL or 18 × 10 mL as default rotor capacities. Check which rotor and tube adapters come with the quote.

  • LTC-L600 centrifuge

    The LTC-L600 is the 6,000 rpm listing. Request the rotor options and force at the tube positions your protocol uses.

  • LTC-XL550 centrifuge

    The LTC-XL550 lists 3,220 × g at 4,000 rpm with its 4 × 500 mL bucket configuration. The higher headline force applies to a different rotor.

High-speed configurations

  • LTC-H1650 centrifuge

    The LTC-H1650 lists rotor options for several small tube and larger vessel formats. Compare the specific rotor row to your target force.

  • LTC-H1850 centrifuge

    The LTC-H1850 table gives 23,797 × g for its 12 × 1.5/2.2 mL rotor and 13,000 × g for the rotor listed for 4 × 100 mL. Match the force to the rotor used.

  • LTC-XH2050 centrifuge

    The LTC-XH2050 offers multiple rotor formats, including a larger-volume configuration in its catalog listing. Check the actual speed and force for that rotor.

Refrigerated configurations

  • LTC-H16M refrigerated centrifuge

    The refrigerated LTC-H16M has several rotor options. Request the speed and force for the exact rotor because the summary and rotor table use different figures.

  • LTC-H20M refrigerated centrifuge

    The refrigerated LTC-H20M table lists 27,800 × g with the 12 × 1.5/2.2 mL rotor. Use the row for your actual tube or bottle format.

What to include in your quote request

  • Provide tube or bottle dimensions, closure type, working fill and number of samples per run. Ask for the compatible rotor, buckets and adapters.
  • Send the required relative centrifugal force and run time. Ask for the rated force and speed with the specified rotor and container combination.
  • If temperature matters, state the sample temperature requirement during the run and request the corresponding performance information.

Specifications and sources

Specifications and options are from the linked Solution Instruments product listings. Confirm model-specific configuration and included accessories before ordering.

← Back to Buying Guides

Back to blog