81-Place vs 100-Place Freezer Boxes

Meling Biomedical · Buying Guide
Measure the closed vial, including its cap and label, before choosing the denser divider.
Choose the 81-place box when you need more divider space for compatible vials. Choose the 100-place box for higher density after checking the cap and body dimensions. Both listed boxes measure 133 × 133 × 53 mm and come in packs of ten.
Measure the vial at its widest point
Record body diameter, cap diameter and total closed height. A nominal millilitre capacity describes the contents of a vial. Two vials of the same nominal capacity can use different caps and thread designs. Test a closed vial with its label in a representative divider before assigning a storage count.
| Model | Grid | External dimensions | Pack |
|---|---|---|---|
| ZKZH-81-2 | 9 × 9 · 81 positions | 133 × 133 × 53 mm | 10 complete boxes |
| ZKZH-100-2 | 10 × 10 · 100 positions | 133 × 133 × 53 mm | 10 complete boxes |
Choose the grid using your vial mix
The 9 × 9 box has 81 positions and is the more flexible option for mixed compatible vial formats. The 10 × 10 version has 100 positions and tighter spacing. The 100-place listing advises against use with 1.8 mL external-thread vials. Keep the divider choice with the vial part number in your purchase record.
Plan around box positions in the rack
The two box variants share the same outer dimensions, so the divider selection changes the number of compatible vials per box. Verify the complete box with lid in the proposed rack, including the space required to slide it out. Count by whole boxes and reserve any dedicated positions your lab needs for separate projects.
Translate the requirement into order quantities
Each order unit is a pack of ten complete boxes with dividers. For a 24-box requirement, three packs provide 30 boxes. Decide whether to use the six spare boxes for growth or for staging, and list any mix of 81- and 100-place packs on the request.
Common purchasing questions
Can I choose a divider by vial volume alone?
Check vial body, cap and closed height, then confirm access with a physical fit check where available.
Compare models and request a quote
Include the vial model, cap dimensions, divider preference and pack count when requesting an accessory quote.

